The MiniTT1 Transmitter is easy to use; just slide in place and begin to shoot.
The new PocketWizard ControlTL® System interprets the complex CLS / i-TTL data
being sent through the camera's hot shoe and digitally transmits it in a
reliable radio signal. Change the exposure compensation dial on the camera, and
those commands pass seamlessly through the system to your remote flash. Adjust
your aperture or ISO and the system automatically corrects for those changes. ne
or more PocketWizard FlexTT5® Transceivers connected to Nikon CLS / i-TTL
flashes or any PocketWizard Receiver for triggering flash or remote cameras.
The MiniTT1 Transmitter is easy to use; just slide in place and begin to shoot.
The new PocketWizard ControlTL® System interprets the complex CLS / i-TTL data
being sent through the camera's hot shoe and digitally transmits it in a
reliable radio signal. Change the exposure compensation dial on the camera, and
those commands pass seamlessly through the system to your remote flash. Adjust
your aperture or ISO and the system automatically corrects for those changes.
Add the PocketWizard AC3 ZoneController to easily adjust up to three zones of
light independently, in both i-TTL or manual. PocketWizard ControlTL radio
communication allows you to shoot farther, faster, around corners, through walls
even at high noon in bright daylight. Now you can deploy a wireless i-TTL flash
system wherever you want, without infrared limitations, in seconds. Take
advantage of PocketWizard's HyperSync Technology that allows 1/500th of a second
camera sync or more with many camera/strobe set-ups. HyperSync allows you to
advance the timing of your flash trigger so that faster than X-sync speeds can
be achieved.
Need more speed? Push your ControlTL system beyond 1/500th and go into High
Speed Sync / FP mode automatically. With HSS Sync engaged in the camera menu,
select any shutter speed you want with your Nikon i-TTL flashes, all the way up
to 1/8000th of a second. With radio wireless, the possiblities of FP Sync become
a lot more exciting.
Use the MiniTT1 with the PowerST4 Receiver, PowerMC2 Receiver, or AC9 AlienBees
Adapter on a FlexTT5 and get remote power control with your Elinchrom RX or any
Paul C. Buff flash.
Use the MiniTT1 with the PowerST4 Receiver, PowerMC2 Receiver, or AC9 AlienBees
Adapter on a FlexTT5 and get remote power control with your Elinchrom RX or any
Paul C. Buff flash.
Use the MiniTT1 for standard triggering with any PocketWizard Receiver including
the FlexTT5, PlusII or MultiMAX. Yes, you can intermix i-TTL flash with any
manual flash extending your lighting possiblities.
The MiniTT1 works on the powerful ControlTL platform and can be configured via
the PocketWizard Utility. The PocketWizard Utility download is provided to
support the MiniTT1 via a USB port. The Utility allows you to configure your
channel settings, dial in your HyperSync timing, adjust your sleep-mode timers
and update your product to the latest firmware.
The PocketWizard MiniTT1 Transmitter is the start of a new era in wireless
trigger control.
- 2 Channel Settings + Learn Mode
- Reverse Compatible
- HyperSync & High-Speed Sync Technology
- Built-in Hot Shoe
- Low-Profile Design
- Configurable and Upgradeable
Specifications:
| TTL Compatible |
Nikon CLS / i-TTL |
| Number of Channels |
52 Channels over 26 Frequencies |
| Antenna |
Internal |
| Maximum Range |
Up to 800 feet (10 to 240 meters) for CLS / i-TTL
triggering depending on flashused, antenna orientation and other
variables.
Up to 1200 feet (10 to 365 meters) for basic triggering
depending on flash used,antenna orientation and other variables |
| Mounting |
Hot-shoe |
| Maximum Shooting Rate |
TTL Mode: within approximately 1 FPS of camera's
maximum FPS
Basic Trigger Mode: Camera Max FPS |
| Status Indicator: |
LED, Green, Amber, Red status indications |
| Voltage Present: |
3.3 VDC (all pins) - safe for all cameras |
| Hot Shoe voltage protection |
Hot Shoe: up to 50V |
| USB: |
USB Compliant 2.0, Mini-B Connector |
| Construction: |
High impact plastic, captive battery door Hot shoe
made of glass reinforced resin |
| Power: |
3 V Lithium battery, CR2450 (included) or CR2354
Lithium coin cell type |
| Battery Life: |
30 - 50 hours of camera "awake time" depending on
shooting habits |
| Compatibile - Cameras |
D3x, D3s, D3, D2x, D700, D300, D300s, D200, D90, D80,
D40x, D40
NOTE: Nikon D3100 - camera has initial feature
compatibility built into the firmware and will function well in normal
sync modes however a future firmware update will be released shortly to
improve timing capabilities with Rear CurtainSync and add other
compatibility improvements.
Nikon D7000 camera and SB-700 flash -
currently being researched, and should beaddressed in a future firmware |
| Non Compatible - Cameras |
D1, D1x, D1h, D2h, D2hs, D100, D70, D70s, Coolpix and
Film-based cameras |
| Compatibile - Flashes |
Nikon Speedlights as Remotes: SB-400, SB-600, SB-800,
SB-900
Nikon On-Camera Master Flashes: SB-800, SB-900, SU-800 |
| Non Compatibile - Flashes |
Any older generation Nikon Flashes as Remote Units
Such as:
SB-80DX; SB-80; SB-28DX; SB-28; SB-50 |
| Dimensions |
2.8 x 1.9 x 1.3" (7.1 x 4.9 x 3.3cm) LxWxH |
| Weight |
2.3 oz (65g) |
|
